Limewash Stucco and Concrete in Kirkland

Typical cost in Kirkland

  • One wall or garden wall, about 300 sq ft$1,000 – $2,400+
  • One-story stucco house, about 1,500 sq ft$5,500 – $12,000+
  • Two-story stucco house, 2,000–2,500 sq ft$7,000 – $18,000+

Stucco facades, block outbuildings and poured or basement walls can take limewash instead of masonry paint, and that is how we coat them at Kirkland Limewash Painting. Clean, sound cement-based surfaces can absorb limewash, and the result is a softly clouded, plaster-like finish.

Cement-based surfaces are alkaline and soak up water unevenly, so we check them and try a patch before saying whether lime or another coating is the right choice. Stucco and concrete work covers Kirkland and Redmond, Kenmore, Woodinville, Bothell, Yarrow Point and Lake Forest Park.

Request a free quote

Stucco cottage finished in warm sand-colored limewash

Stucco and concrete limewash options

Cement stucco exteriors

On bare or previously limewashed cement stucco, limewash adds a soft variation in tone. If the stucco is already painted, intact acrylic needs a bonding primer approved by the limewash maker, and elastomeric coatings usually have to be removed. Hairline cracks should be repaired beforehand so rain cannot work in behind the new surface.

New stucco

New stucco must cure before any coating, limewash included. One limewash maker asks for roughly 21 to 28 days on fresh Portland cement stucco; other brands publish their own figures. The product and the stucco’s condition decide when it is ready, and going on too early risks blotchy color.

Concrete block and cinder block

Block garages, garden walls and foundations tend to look utilitarian, and limewash softens them. Mortar joints drink more than block faces, so we scrub a base coat into the texture and then add a topcoat to even out the result.

Poured concrete walls

Limewash can take poured or board-formed concrete walls toward a softer, stone-like tone, indoors or out, where sealed concrete keeps its gray. It only works if the concrete can absorb, and release agents, curing compounds and sealers all reduce that, so cleaning and a water test come before any sample.

Basement and garage walls

Waterproofing coatings and limewash do different jobs. Limewash is a traditional, breathable finish that brightens masonry basement walls without trapping moisture behind a film, but it cannot stop active leaks or water pressing in from the soil. If the basement is damp, fix the water first and pick the finish afterward.

Close view of soft clouded limewash texture in raking light

Is your stucco or concrete ready?

We tap for hollow spots, look for cracking and salt bloom, and find out what has been applied before, including any water repellent. Two kinds of old coating block absorption, and each needs a different answer. Intact acrylic paint can sometimes be primed, if the limewash maker offers a bonding primer for that use. Elastomeric coatings normally have to come off; at least one major maker rules them out.

Outdoors, curing lime needs mild, dry days and protection from rain and harsh sun, as it does on brick and stone.

Looks that suit stucco

Warm sand, chalk and light clay limewash colors bring stucco texture forward instead of flattening it. Deeper earth tones suit garden walls and outbuildings. Boards brushed on the same stucco texture show how much the color will vary across the finished wall.

Request a free limewash quote

Name the surface (stucco, block or cast concrete), say whether it is painted, sealed or bare, and add the address so we can lay out the choices. We'll get back to you soon with an estimate or any questions we have. Estimates are free and there's no obligation.

Call (425) 307-5040

Call (425) 307-5040