Limewash Stone Walls and Chimneys in Kirkland

Typical cost in Kirkland

  • One exterior chimney$750 – $3,000+
  • Entry walls and chimney, 300–600 sq ft$1,000 – $5,000+

Limewash is a middle path between bare and painted stone, and at Kirkland Limewash Painting we use it on veneer, fieldstone, chimneys, foundations and garden walls. On absorbent stone and mortar, the wash pulls a patchwork of colors together while the shape and shadow of each stone remain.

Stone varies more than brick, so an absorption test and a sample on the stone itself are the best way to tell whether limewash, a sealer or nothing at all suits a wall. We take on stone projects in Kirkland and Redmond, Kenmore, Woodinville, Bothell, Yarrow Point and Lake Forest Park.

Request a free quote

Fieldstone entrance and chimney limewashed in soft bone white

Stone limewash options

Stone house exteriors and veneer

Replacing dated stone cladding is costly. Limewashing entries, wainscots or whole facades can calm a busy color mix or tie the stone in with new siding instead. Cast veneer and quarried stone absorb differently, so the first step in picking a product is finding out which material you have.

Stone chimneys

Chimneys catch more wind and rain than any other masonry on most houses, and no coating, lime or paint, fixes a failing crown, open joints or loose flashing. With those sound, limewash evens out the stack’s color without flattening it.

Stone foundations and plinths

Patched rubble and stone foundations on older homes can be repointed to match, painted, or limewashed. Limewash is the traditional breathable option and evens out the color without sealing the stone, though any moisture coming from below grade needs to be traced before you choose a coating.

Garden walls, piers and outdoor stone

Piers, gateposts and retaining walls among plants suit limewash, which is meant to look weathered from the start. Water reaches these walls from every side and from above, so copings and drainage deserve as much attention as the finish.

Interior stone walls

Indoor stonework, whether a feature wall or a kitchen or stair surround, can stay natural or be lightened a few shades with lime for a brighter room. Weather is not an issue indoors, but absorption still is, and dense or sealed stone may need a different finish.

Fieldstone garden retaining wall limewashed in soft bone white

How much of the stone should show

Light wash

Nearest to untouched stone. A single sheer pass, or a fresh pass sprayed back where the brand permits, quiets only the harshest colors.

Even tone

More even, but still textured. More coats move the stone toward one bone, chalk or soft gray; how many depends on the brand and the stone, which a sample settles.

Mortar emphasis

Joints and faces can be handled separately. Loading the joints first and skimming the faces either outlines the pattern or blurs it.

Absorption, sealers and moisture

Absorption decides whether limewash or a different finish is right. Granite, very tight stones and anything sealed in the past may shed water, and the lime with it. Drip water onto a handful of stones and watch whether it darkens and disappears.

A shaded wall that stays wet and mossy has to be cleaned and left to dry until it is workable. Persistent water sources such as gutters, grading or ground splash need fixing too, since a breathable finish only helps a wall that can dry.

Request a free limewash quote

Describe the stonework, mention any sealer you know of, and add the address. We'll get back to you soon with an estimate or any questions we have. Estimates are free and there's no obligation.

Call (425) 307-5040

Call (425) 307-5040